DIP213823XTENGB- -  -  N- Watertight Proud Steel Door with Glass -N- S- S- -04/07/2024- Prodotti per nautica diporto- - SN- N- - N-  - 166,397BbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP213823XT- N-Sep 3, 2026166397
 
Form
  Prodotti per nautica diporto(TO)
DIP213823XT
Certification N. DIP213823XT - (ENG)
Certificate date 04/07/2024
Product Porta stagna

Model or Denomin.
Items
Watertight Proud Steel Door with Glass
Applicant
Directive NONE
Standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Expire date 03/09/2026
Responsible Office İstanbul
CERTIFICATO DI OMOLOGAZIONE ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. DIP213823XT
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Description Watertight door
Type Watertight Proud Steel Door with Glass
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
AYDINLI BIRLIK OSB MAH., BATI CAD., No.28
34953 Tuzla
TURKEY
Reference standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
  

 
 




   .   This Certificate is valid until September 3, 2026
_________________________________
RINA Services S.p.A.
Alper Tek
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATO DI OMOLOGAZIONE DI TIPO
DIP213823XT
Reference documents:
- Job nr. 2023/XT/01/2138


Product Description:
- Watertight doors: 650 x 1500 mm; 1000 mm x 1700 mm; 1100 mm x 2200 mm.
- See drawings approved on 30 January 2020 with nr. ISDP-24209 , ISDP-24210 , ISDP-24211
- If the same construction materials, as per approved a.m. drawing, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 650 and 1100 mm and long side between 1500 and 2200 mm.
- Doors suitable for an hydraulic pressure of 5.0 m head.
- Doors fitted on escape ways are to be operable by both sides (handles are to be permanently fixed).
- When located in houseside, the doors are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness"..
- In accordance with the RINA rules, a test certificate is to be issued for each door.
- Upon satisfactory completion, a certificate of conformity to the prototype has to be issued
and signed by a responsible person within the organization.


Fields of application:
- Watertight door

 
**** NOTICE: This is NOT an official certificate ****