MED077024CSENGD- -  -  N- ORIONE 170 -N- S- S- -11/03/2024- Marine Equipment- - SN- S- - N-  - 0B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED077024CS- N-Mar 10, 20290
 
Form
  Marine Equipment(TO)
MED160924GE/006
Certification N. MED077024CS - (ENG)
Certificate date 11/03/2024
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
ORIONE 170
Applicant CANEPA & CAMPI SRL
Place of requester VIA GRAMSCI 4-6  %  16010 Manesseno (GE)  % ITALY
Tel. N.,Fax, Email 0107261006, 0107170020, rcampi@canepaecampi.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81 (70) as amended,IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.,IMO MSC.1/Circ.1470,IMO MSC.1/Circ.1628
Request 01/03/2024
Expire date 10/03/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED077024CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.4
Description Life jackets
Type ORIONE 170
Applicant CANEPA & CAMPI SRL
VIA GRAMSCI 4-6,16010 Manesseno (GE),ITALY
Testing standards IMO Res. MSC.81 (70) as amended,IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.; IMO MSC.1/Circ.1470; IMO MSC.1/Circ.1628
Issued in Genoa on
This Certificate is valid until
March 11, 2024
March 10, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED077024CS
Page 1 of 3

Main characteristics

Inflatable lifejacket for adult, mod. ORIONE 170 with the followings main components:

- Materials and components approved and/or tested according to ISO 12402-7:2020;

- Retro-reflective materials approved according to IMO MSC.481(102);

Reference documents

Rel C&C 005.1 Orione 170, Rev 0 issued by Canepa & Campi Srl and approved by RINA with n° CSST 22332;
Lay-out drawing n° DIS-C&C-012÷014/23 issued by Canepa & Campi Srl and approved by RINA with n° CSST22333;
Technical booklet of "Reference Test Device " issued by Canepa & Campi Srl and filed by RINA with n° CSST 4464;
ORIONE 170 Label issued by Canepa & Campi Srl and approved by RINA with n° CSST 22334.
Tests carried out

Water performance test n° 2009CS013803 issued and filed by RINA with n° CSST 5509 in compliance with
Res.MSC. 81(70) as amended by MSC.200(80);
Laboratory test on lifejacket and RTD buoyancy material issued by RINA Laboratory and filed by RINA with
n° CSST 5508;
Adult Reference Test Device Buoyancy Tracking and Verification, issued and filed by RINA and updated on 18/09/2014;
Test report n° 2015CS011800/1/RSA issued and filed by RINA according to MSC.378(93) with n° CSST 13189.
Application/Limitation of use

The lifejacket is approved for use only by adult of weight more than 43 kg and height more than 155 cm;
It is designed to fit person weighing up to 140 kg and with a chest girth of up to 1.750mm.
Safety harness device with AISI304 double fasteners tested in compliance with ISO12401 may be fixed on lifejacket.

The lifejacket may be equipped with the following light:
- Mod C&C Light 01(approved as per MED/1.2c);

The lifejacket can be equipped with different position indicating lights and retro-reflective materials EC type Approved in compliance with Directive 2014/90/EU as amended.




ATTACHMENT TO
CERTIFICATE No. MED077024CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****