MED005924CS!001ENGD- -  -  N- TERMOMAP® A -N- S- S- -26/01/2024- Marine Equipment- - SN- S- - N-  - 898,924B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED005924CS/001- N-Jan 25, 2029898924
 
Form
  Marine Equipment(TO)
MED061523MI/008
Certification N. MED005924CS/001 - (ENG)
Certificate date 26/01/2024
Type Protezione antincendio
Product Materiali non combustibili
Item Nº MED/3.13
USCG Category N° 164.109

Model or Denomin.
Items
TERMOMAP® A
Applicant MAP SPA
Place of requester VIA C. COLOMBO, 15  %  24046 Osio Sotto (BG)  % ITALY
Tel. N.,Fax, Email 0354195201, 0354825528, abergamini@mapspa.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 20/12/2023
Expire date 25/01/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED005924CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.13
USCG Category Nº 164.109
Description Non-combustible materials
Type TERMOMAP® A
Applicant MAP SPA
VIA C. COLOMBO, 15,24046 Osio Sotto (BG),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
January 26, 2024
January 25, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED005924CS/001
Page 1 of 2

Product description



E Glass fibers, alkali and mineral oils.
  • Nominal density (kg/m3) 130 (+30, -20)
  • Organic content 3.6 %


Fields of application

As non combustible material.
Tests carried out

Tests as per RINA Test Laboratory report No. 2018CS013549/1 and /2 dated 24 Januari 2019 issued according to IMO 2010 FTP Code Part 1.




ATTACHMENT TO
CERTIFICATE No. MED005924CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****