MED485823WS!003ENGD- -  -  N- LJ-IS-II -N- S- S- -01/03/2024- Marine Equipment- - SN- S- - N-  - 1,053,804B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED485823WS/003- N-Feb 28, 20291053804
 
Form
  Marine Equipment(TO)
MED511923WS/003
Certification N. MED485823WS/003 - (ENG)
Certificate date 01/03/2024
Type Mezzi di salvataggio
Product Immersion suits and anti-exposure suits designed to be worn WITHOUT a lifejacket: (b) immersion suit with inherent insulation
Item Nº MED/1.6b

Model or Denomin.
Items
LJ-IS-II
Applicant LJSAFE TECHNOLOGY CO., LTD.
Place of requester Suite 66 Chuangxin Dadao Taizhou (Jiangsu)  % CHINA
Tel. N.,Fax, Email +86 52 86875583, ---, tec@ljsafe.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/32, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC/Circ.1046, IMO MSC.1/Circ.1628.
Request 2023/6/2
Expire date 28/02/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED485823WS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.6b
Description Immersion suits and anti-exposure suits designed to be worn WITHOUT a lifejacket: (b) immersion suit with inherent insulation
Type LJ-IS-II
Applicant LJSAFE TECHNOLOGY CO., LTD.
Suite 66 Chuangxin Dadao Taizhou (Jiangsu),CHINA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/32, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC/Circ.1046, IMO MSC.1/Circ.1628.
Issued in SHANGHAI on
This Certificate is valid until
March 1, 2024
February 28, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED485823WS/003
Page 1 of 3

Product Description


The Immersion Suit (type: LJ-IS-II) is a suit with Inherent-insulation designed to be worn without a lifejacket, and it is manufactured in four sizes:

- M size: Suitable Height 150~170 cm;


- L size: Suitable Height 170~190 cm;
- XL size: Suitable Height 190~205 cm;
- XXL size: Suitable Height 190~205 cm (chest 140 cm).

The suit with Conjoined Type gloves covers the whole body (feet and hands included) except the face, with the following main components:


Material and Components
Item
Model/Type
Manufacturer
Waterproof Material
(Fabric)
CR, Orange&Yellow
Changzhou Chengjiali Polymer Material Company Limited.
Buoyancy Material
EPE Foam, 1.2cm
Yancheng Huyuan Packaging Technology Co., Ltd.
Watertight Zipper
-
Wuxi Hailong Airtight Technology Co., Ltd., or
Jiaxing Kingsell Seal Zipper Co., Ltd.
Polyester high
strength yarn
210D, Orange&Yellow
Chengjun Thread Factory, or
Dongtai Dongyue life-saving equipment accessories factory.
Whistle
ABS
Yuyao Songge Plastic Industry Co., Ltd.
Lifajacket Light
FZYD-II,
FZYD-III,
FZYD-V
Shanghai Fangzhan Fire Technology Co.,Ltd.
Buoyant line
3mm
Danyang City Huangtang Town Chaosheng Craft Ribbon Factory
Retro-reflective Tape
DM1101A, 5cm
Daoming Optics &Chemical Co.,Ltd.
YSL-1101A/B
Yeshili New Materials (Xianju) Co., Ltd.





ATTACHMENT TO
CERTIFICATE No. MED485823WS/003
Page 2 of 3
Field of Application/Limitation

Insulated immersion suits designed to be worn without a lifejacket with additional lifting loop in compliance with IMO Res.MSC.323(89).

Temperature Range : -30°C ~ +65°C.

Buoyancy loss: less than 5% within 24 hours.

Thermal characters: the body core temperature will not fall more than 2°C after a period of 6 h immersion in calm


circulating water at a temperature of between 0°C and 2°C.

Design Assessment

The design assessment is based on IMO Res. MSC.48(66) as amended by IMO Res. MSC.207(81), IMO Res.
MSC.218(82), IMO Res. MSC. 226(82) and IMO MSC. 323(89).

Tests carried out in accordance with revised recommendation on testing of lifesaving appliance, IMO


Res.MSC.81(70), Part 1, including IMO Res.MSC.226(82) and IMO Res.MSC.323(89).

Production tests shall be conducted for each suit in accordance with IMO Res. MSC.81(70), part 2.


Reference Documents

Technical drawing, approved by RINA with No.: SHFP-25965;

Technical Specification, approved by RINA with No.: SHFP-25966;

Bill of Material, approved by RINA with No.: SHFP-25969;

Marking, approved by RINA with No.: SHFP-25971;

Operation and Maintenance Manual, filed by RINA with No.: SHFP-26218;


Test Carried out

The product has been tested in accordance with the Revised Recommendation on Testing of Life-saving appliances, IMO Res. MSC.81(70) Part 1, as amended by IMO Res. MSC.200(80), IMO Res. MSC.226(82) and IMO Res. MSC.323(89).

- Evaluation and Test Report (Ref No.: 2015219), issued by Wuhan Testing Center of Marine Life-saving Appliances, filled by RINA with No.:SHFP-25688.

Remarks

The immersion suit shall be equipped with safety light EC Type Approved, releasable buoyant line and suitable means to lift the wearer from the water, in compliance with MSC.207(81).

The immersion suit can be equipped with different position indicating lights and Retro-reflective materials EC type Approved in compliance with Directive 2014/90/EU as amended.


Notes

For the Immersion suit to be placed on board after October 10, 2026, the Retro-reflective materials to be fitted as per Annex I, Para 1 of IMO Res. MSC.481(102).




ATTACHMENT TO
CERTIFICATE No. MED485823WS/003
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****