MED322024CSENGB- -  -  N- SOMEC FRP P 009 -N- S- S- -30/08/2024- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED322024CS- N-Aug 29, 2029162855
 
Form
  Marine Equipment(TO)
MED322024CS
Certification N. MED322024CS - (ENG)
Certificate date 30/08/2024
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
SOMEC FRP P 009
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email 04384717, 0438471800, info@somecgroup.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 03/07/2024
Expire date 29/08/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED322024CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type SOMEC FRP P 009
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
August 30, 2024
August 29, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED322024CS
Page 1 of 2

Product description

Bulkhead consisting of panels having, maximum height of 2310 mm and maximum width of 1244 mm. Such panels are composed of one steel sheet, 2 mm thick, and one layer of mineral wool with aluminium foil Rockwool type SeaRox MA 740 ALU, having thickness of 30 mm and density of 45 kg/m3, fixed to the steel sheet by means of pins and washers welded with pitch ranging from 315 up to 348 mm. The panel joints are covered, on the insulated side, with a further layer of mineral wool having width of 300 mm fixed to the steel sheet by means of N. 2 pins and washers welded with pitch of 200 mm in horizontal (one on each panel) and with a pitch of 315 mm in vertical; this additional layer covers also all the bulkhead edges for a width of 300 mm. The panel steel sheets are fixed on the lower side, to steel flats, 5 mm thick by means of M8 screws having a ranging pitch from 100 mm (in way of the vertical joints panel) up to 522 mm (in way of the panel); in the upper side and vertical sides the panels are fixed by “L” shaped steel fixing clamps having dimensions of 80x44 mm and thickness of 3 mm fitted with M8 screws having ranging pitch from 518 mm up to 770 mm. The panels, having ranging width from 550 mm up to 1244 mm may be provided with a steel “Z” shaped horizontal stiffener having dimensions 88x47 mm and thickness of 2 mm fixed to the steel sheet panel by M5 steel screws having a pitch of 522 mm. The central panel may be provided with a vertical insulation joint created by overlapping the two adjacent layers of insulation with a width of 150 mm. The joints are fitted with calcium-magnesium-silicate spacers ROLF KUHN GmbH type KERAFIX 2000 and are sealed with SIKA type SIKAFLEX 591. The bulkhead panels may be installed with the following mechanical fastening systems: N.1 M8 stainless steel screw “HILTI”, N.1 stainless steel screw D 6.3 mm, N.1 stainless steel screw D 5.5 mm, N.1 stainless steel screw D 4.8 mm, N.1 stainless steel screw D 4.2 mm, N.1 stainless steel threaded insert M8 with screw and N.1 stainless steel threaded insert M6 with screw.
Field of application
Fire resistant A-0 Class lightweight bulkhead with fire hazard on side fitted with the mineral wool.
Reference documents
SOMEC drawing No. TED-0035 dated 29 August 2024 enclosed to the Test Report No. 2024CS013220 issued on 30 August 2024.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2024CS013220 issued on 30 August 2024 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED322024CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****