FAB003426BUENGB- -  -  N- Aluminum foundry -N- S- S- -15/07/2026- Fabbricanti Approvati- - SN- N- - S-  - 2,389,951BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB003426BU- N-Jul 14, 20312389951
 
Form
  Fabbricanti Approvati(TO)
FAB003426BU
Certification N. FAB003426BU - (ENG)
Certificate date 15/07/2026
Type Approvazione di fabbricanti di materiali
Product Aluminum alloy forgings

Model or Denomin.
Items
Aluminum foundry
-
Applicant Fundición AL3 S.R.L
Place of requester José Ignacio Rucci 1853, Valentín Alsina  %  1106 Capital Federal (Città Autonoma Di Buenos Aires)  % Argentina
Tel. N.,Fax, Email ---, ---, administracion@fundicional3.com.ar
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents RINA Rules
Expire date 14/07/2031
Responsible Office RINA Argentina Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB003426BU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Aluminum alloy forgings
Type Aluminum foundry
-
Applicant Fundición AL3 S.R.L
José Ignacio Rucci 1853, Valentín Alsina
1106 Capital Federal (Città autonoma di Buenos Aires)
ARGENTINA
Reference standards RINA Rules for Type Approval of manufacturers of materials
Reference documents RINA Rules
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until July 14, 2031
_________________________________
RINA Services S.p.A.
Carlos Gerardo Liendo Guedez
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB003426BU
Enclosure - Page 1 of 1
-

APPROVAL CONDITIONS


CHEMICAL COMPOSITION OF THE MATERIALS FOR THE CASTING– AS10G
Elemento
Si
Fe
Cu
Mn
Mg
Ni
Zn
Pb
Sn
Valor
9 a 11
0,60 max
0,10 max
0,50 max
0,17 a 0,40
0,05 max
0,10 max
0,05 max
0,05 max


Survey Condition :
The forgings are to be used for construction of vent valves on board of ships classed with RINA shall meet the requirement of
RINA Rules and shall be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Argentina Marine July 15, 2026
**** NOTICE: This is NOT an official certificate ****