MED460524CSENGF- -  -  N- M13Y/2S -N- S- S- -28/03/2025- Marine Equipment- - SN- S- - N-  - 315,149B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED460524CS- N-Mar 27, 2030315149
 
Form
  Marine Equipment(TO)
MED038225PA/001
Certification N. MED460524CS - (ENG)
Certificate date 28/03/2025
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
M13Y/2S
Applicant SORMEC S.R.L.
Place of requester CONTRADA SASI - AREA ARTIGIANALE 22/23/24  %  91011 Alcamo (TP)  % ITALY
Tel. N.,Fax, Email 0924 502655, 0924 27047, quality@sormec.net
Directive (EU) 2024/1975
Standards IMO Res. MSC 81(70) as amended
Reference Documents Reg. III/4, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Request 12/3/2025
Expire date 27/03/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Marco Revello S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED460524CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type M13Y/2S
Applicant SORMEC S.R.L.
CONTRADA SASI - AREA ARTIGIANALE 22/23/24,91011 Alcamo (TP),ITALY
Testing standards IMO Res. MSC 81(70) as amended
Reference standards Reg. III/4, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 28, 2025
March 27, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED460524CS
Page 1 of 2
TECHNICAL DATA

The davit arm consists of a first fixed extension and a second telescopic extension which is extended through the extension hydraulic cylinder.
It swings on a column fixed to the deck; the movement, from the inboard to the outboard position, is obtained by means of an hydraulic accumulator which allows the davit to be independent from the main energy supply.
The davit is designed to launch and recover a rescue boat having weight not greater than 10.3kN at full complement of equipment and persons.
The outreach is between a minimum of approximately 1.0m and a maximum of 6.35m.

REFERENCE DOCUMENTS
Title Appr. No.
Boom STRT - 58963
Column STRT - 58964
Column hydraulic cylinder STRT - 58965
Extension hydraulic cylinder STRT - 58966
Pedestal STRT - 58967
Calculation report STRT - 58968 (Only for information)
First extension STRT - 58969
Second extension STRT - 58970
Slew ring STRT - 58971 (Only for information)
Pins STRT - 58972
General arrangement STRT - 58973 (Only for information)


TESTS CARRIED OUT
In accordance with IMO Resolution MSC.81(70), as per Test Report dated 6/2/2025.




ATTACHMENT TO
CERTIFICATE No. MED460524CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****