MED378922CSENGF- -  -  N- AIEC AS22 A30 -N- S- S- -23/09/2022- Marine Equipment- - SN- S- - N-  - 1,180,355B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED378922CS- N-Sep 22, 20271180355
 
Form
  Marine Equipment(TO)
MED211122GE/001,MED217223GE/001,MED217323GE/002,MED159424GE/001
Certification N. MED378922CS - (ENG)
Certificate date 23/09/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16

Model or Denomin.
Items
AIEC AS22 A30
Applicant AIEC Service Srl
Place of requester Via delle Vigne 28  %  16010 Mele (GE)  % ITALY
Tel. N.,Fax, Email ---, ---, aiecservice@aiec.it
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 14/9/2022
Expire date 22/09/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED378922CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.16
Description Fire doors
Type AIEC AS22 A30
Applicant AIEC Service Srl
Via delle Vigne 28,16010 Mele (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
September 23, 2022
September 22, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED378922CS
Page 1 of 3

Product description

Double leaf sliding door with vertical opening whose maximum clear size is 800 mm (W) and 1000 mm (H). The door leaves, having maximum dimensions of 850 mm (W) and 545 and 590 mm (H) and thickness of 41 mm, are composed of two carbon steel sheets 1 mm thick each and, in between, of three insulating material layers. The first two layers, moving from the side fitted with the leaf sliding guides, are composed of product named MICROTHERM OVERSTICHTED PANEL, 10 and 6 mm thick and having density of 240 kg/m3; the third layer is composed of mineral wool type PAROC FIRE SLAB 100, 25 mm thick and having density of 100 kg/m3. On the aperture, an H shaped steel profile, relevant to the leaf mating, 2 mm thick and having dimensions of 48x60 mm, is fitted (tack welded to the upper leaf). The lower leaf is equipped with a locking system composed of wedge and thermoexpanding material. The door frame is composed of "C" shaped carbon steel profiles having dimensions of 53.5x23.5 mm and thickness of 2 mm. The door is fixed to the bulkhead by means of No. 12 "S" shaped steel profiles having width of 50 mm and thickness of 3 mm bolted to the bulkhead. The frame is insulated with two layers of the same mineral wool having thickness of 40 mm and width of 220 mm (lower layer) and thickness of 60 mm and width of 130 mm (upper layer). The bulkhead is insulated, on the bulkhead portion external to the door having width of 200 mm and on the sliding leaf space inside the sliding guides, with one layer of the same mineral wool having thickness of 40 mm. The mineral wool is fixed to the bulkhead by means of steel pins welded with pitch ranging from 200 up to 300 mm.
Field of application
Fire resistant A-30 Class single leaf sliding door with fire hazard on the side fitted with the leaf sliding guides.
The fire resistance test was carried out in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
Reference documents
N.A.VI. Snc drawings No. NV 2412 (2 sheets) dated 7 July 2012 approved on 5 June 2012 with endorsement No. LABS-674.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2012CS011462 issued on 14 June 2012 according to IMO Res. A. 754(18) and to IMO MSC.1/Circ. 1319 dated 11 June 2009.




ATTACHMENT TO
CERTIFICATE No. MED378922CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****