MED409824CS!005ENGD- -  -  N- SGSHD-L150P-2 -N- S- S- -14/10/2024- Marine Equipment- - SN- S- - N-  - 25,861B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED409824CS/005- N-Oct 13, 202925861
 
Form
  Marine Equipment(TO)
MED089124PA/005
Certification N. MED409824CS/005 - (ENG)
Certificate date 14/10/2024
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
SGSHD-L150P-2
Applicant TECNIMPIANTI S.P.A.
Place of requester STRADA CONSORTILE FIUME TORTO - FRAZIONE ZONA INDUSTRIALE  %  90018 TERMINI IMERESE (PA)  % ITALY
Tel. N.,Fax, Email +39 091 8140283, +39 091 8140325, giorgio.merkouris@tecnimpiantispa.com
Directive (EU) 2024/1975
Standards IMO Res. MSC 81(70) as amended
Reference Documents Reg. III/4, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Request 14/3/2024
Expire date 13/10/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Marco Revello S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED409824CS/005

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type SGSHD-L150P-2
Applicant TECNIMPIANTI S.P.A.
STRADA CONSORTILE FIUME TORTO - FRAZIONE ZONA INDUSTRIALE,90018 TERMINI IMERESE (PA),ITALY
Testing standards IMO Res. MSC 81(70) as amended
Reference standards Reg. III/4, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 14, 2024
October 13, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED409824CS/005
Page 1 of 2

TECHNICAL DATA


The davit is designed for:
- launching lifeboats having maximum load of 169 kN at full complement of equipment and persons (88 and 81 kN for aft and fore arm respectively).
- turning out and retrieving lifeboats having maximum load of 60 kN (30 for each arm).
The movement from the inboard to the outboard position is obtained by means of an hydraulic accumulator and by gravity which allows the davit to be independent from the main energy supply.
The davit is designed to allow the lifeboat to be boarded and launched directly from the embarkation deck.


REFERENCE DOCUMENTS

Dwg. no. Title Appr. no. 9476/13/5012 Transverse section STRT-2298
9476/64/5042 Workshop pamphlet STRT-2309
9476/64/5041 Mounting pamphlet STRT-2311
9476/64/5038 Sheaves STRT-2314
9424/64/5031 Remote control arrangement STRT-2318 (For Information)





TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70).




ATTACHMENT TO
CERTIFICATE No. MED409824CS/005
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****