MED444923WSENGD- -  -  N- XDSD-40, XDSD-50 -N- S- S- -01/03/2024- Marine Equipment- - SN- S- - N-  - 954,684B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED444923WS- N-Feb 28, 2029954684
 
Form
  Marine Equipment(TO)
MED435023WS/003
Certification N. MED444923WS - (ENG)
Certificate date 01/03/2024
Type Protezione antincendio
Product Fire-fighting hoses - non-percolating lay flat firefighting hoses (range of the inside diameter from 25 mm to 52 mm)
Item Nº MED/3.29

Model or Denomin.
Items
XDSD-40, XDSD-50
Applicant DONGTAI CITY XINGDUN MARINE EQUIPMENT CO., LTD.
Place of requester NO.6 MARINE EQUIPMENT INDUSTRIAL PARK % 224234 XINJIE TOWN % DONGTAI CITY, JIANGSU PROVINCE  % CHINA
Tel. N.,Fax, Email 0086-0523-87573297, 0086 0523-85755968, mym85751818@163.com
Directive (EU) 2023/1667
Standards EN 14540:2014
Reference Documents SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Request 2023/10/09
Expire date 28/02/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED444923WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.29
Description Fire-fighting hoses - non-percolating lay flat firefighting hoses (range of the inside diameter from 25 mm to 52 mm)
Type XDSD-40, XDSD-50
Applicant DONGTAI CITY XINGDUN MARINE EQUIPMENT CO., LTD.
NO.6 MARINE EQUIPMENT INDUSTRIAL PARK,224234 XINJIE TOWN,DONGTAI CITY, JIANGSU PROVINCE
Testing standards EN 14540:2014
Reference standards SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in SHANGHAI on
This Certificate is valid until
March 1, 2024
February 28, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED444923WS
Page 1 of 3

Product Description


Fire-fighting Hoses (Type: XDSD-40, XDSD-50): Non-percolating lay flat fire-fighting hoses for fire water systems

Temperature range: -30°C / 70°C

Maximum working pressure: 1.5 Mpa

Material:

- Inside lining: Thermal plastic polyurethane (TPU),

Type: ER-88AS,

Manufacturer: Coating Fine Chemical (KunShan) Co.,Ltd

- External fabric: Filament yarn,

Type: Polyester,

Manufacturer: Jiangsu Hengli Chemical Fiber Co.,Ltd

Model
Internal diameter
Layflat breadth
Outside diameter
XDSD-40
40 mm
62 mm
43 mm
XDSD-50
50 mm
86 mm
53 mm

Model
External Fabric Thickness
Inside Lining Thickness
Weight (Kg/m)
XDSD-40
0.95 mm
0.55 mm
0.175
XDSD-50
0.95 mm
0.55 mm
0.224

Field of Application/Limitation

Approved for discharging water from the fire main by using fire hoses (SOLAS II-2/10.2.3 and 2000 HSC Code, 7.7.5).

ATTACHMENT TO
CERTIFICATE No. MED444923WS
Page 2 of 3
Reference Documents

Technical documents prepared by Dongtai City Xingdun Marine Equipment CO.,LTD:

- The Design Calculation of Fire hose, filed by RINA with No.: SHFP-12057;

- Product Specification, approved by RINA with No.: SHFP-12114;

- Detail Drawing, approved by RINA with No.: SHFP-12060.


Test Carried Out

Tests carried out as following:

- Test Report No.: 2018WS01-1009-1 (for Type: XDSD-40) and 2018WS01-1009-2 (for Type: XDSD-50), issued by Fire Equipment Quality Supervision Testing Center of Shanghai Fire Research Institute, Ministry of Public Security in compliance with EN14540:2014, witnessed and filed by RINA with No.: SHFP-12058 and SHFP-12059;

- Routine Test Report for fire hose (Type: XDSD-40) and filed by RINA with No.: SHFP-25236;

- Routine Test Report for fire hose (Type: XDSD-50) and filed by RINA with No.: SHFP-25237.


Marking of Product

The products are to be marked according to EN 14540:2014, Section 8 and with the MED Mark of Conformity (wheel mark). Furthermore, the obligations of manufacturers as defined in Article 12 of Directive 2014/90/EU shall be observed.
Notes

This certificate annuls and replaces the certificate No. MED100918WS dated 10/25/2018 due to expiration.




ATTACHMENT TO
CERTIFICATE No. MED444923WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****