MED166423CSENGD- -  -  N- ADESIRN -N- S- S- -10/05/2023- Marine Equipment- - SN- S- - N-  - 922,800B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED166423CS- N-May 9, 2028922800
 
Form
  Marine Equipment(TO)
MED207524GE/005
Certification N. MED166423CS - (ENG)
Certificate date 10/05/2023
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (e) adhesives used in the construction of 'A', 'B' & 'C' class divisions
Item Nº MED/3.18e

Model
Items/Sizes
ADESIRN
Applicant SIRN S.R.L.
Place of requester VIA CASAREGIS 22/1  %  16129 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 586771, 010 542678, genova@sirn.it
Directive (EU) 2022/1157
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 02/05/2023
Validity 09/05/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED166423CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.18e
Description Surface materials and floor coverings with low flame-spread characteristics: (e) adhesives used in the construction of 'A', 'B' & 'C' class divisions
Type ADESIRN
Applicant SIRN S.R.L.
VIA CASAREGIS 22/1,16129 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
May 10, 2023
May 9, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED166423CS
Page 1 of 2

Product description

One component acrylic adhesive in water emulsion. The product may be applied by means of toothed spatula (triangular shape having height 2 mm or height 6 mm and pitch 18 mm).
  • Mass per area range (g/m2): 1250 ± 10%
  • Density (kg/dm3): 1.2 ± 0.05
Fields of application

As adhesive.
As material for all exposed surfaces. When intended for bulkhead and ceiling the product may be applied to any non-combustible support having any thickness and a density ³ 195 kg/m3. When intended for deck the product may be applied to any non-combustible support, any metallic support or any material having low flame spread characteristics.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO Res. MSC. 61(67).


Tests carried out

Tests as per RINA Test Laboratory report No. 2013CS01684 issued on 15 May 2013 according to IMO Res. A.653(16).




ATTACHMENT TO
CERTIFICATE No. MED166423CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****