MED032825WSENGF- -  -  N- FH70-1 -N- S- S- -18/11/2024- Marine Equipment- - SN- S- - N-  - 86,359B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED032825WS- N-Nov 17, 202986359
 
Form
  Marine Equipment(TO)
MED681224WS/001,MED008525WS/001,MED456725WS/001,MED317325WS/001,MED317325WS/003,
MED392025WS/001,MED392025WS/003,MED450025WS/001,MED671325WS/001,MED930125WS/001,
MED048126WS/001,MED456725WS/004,MED219826WS/001,MED219826WS/004,MED461026WS/001,
MED581026WS/001,MED673826WS/001
Certification N. MED032825WS - (ENG)
Certificate date 18/11/2024
Type Mezzi di salvataggio
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº MED/1.23

Model or Denomin.
Items
FH70-1
Applicant CSSC LUZHOU ZHENJIANG MARINE AUXILIARY MACHINERY CO., LTD.
Place of requester 56# Yuehe Street, Jianbi Town, Zhenjiang City, Jiangsu Province, CHINA
Tel. N.,Fax, Email 0086 511 88724013, 0086 511 83361172, zmamw@vip.163.com
Directive (EU) 2024/1975
Standards IMO Res.MSC 81(70) as amended
Reference Documents Reg. III/4, III/16, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Expire date 17/11/2029
Head Office SHANG HAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED032825WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.23
Description Launching appliances for free-fall lifeboats
Type FH70-1
Applicant CSSC LUZHOU ZHENJIANG MARINE AUXILIARY MACHINERY CO., LTD.
56# Yuehe Street, Jianbi Town, Zhenjiang City, Jiangsu Province, CHINA
Testing standards IMO Res.MSC 81(70) as amended
Reference standards Reg. III/4, III/16, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in SHANG HAI on
This Certificate is valid until
November 18, 2024
November 17, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED032825WS
Page 1 of 2

TECHNICAL DATA


Product Description:
- Maximum Working Load: 70kN
- Minimum Launching Load: 43kN
- Maximum Hoisting Load: 51kN
- To be used for trim not bigger than 10 degrees and list not bigger than 30 degrees either way.
- Arrangement/positioning of launching appliance on board of ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawing SHST- 34566,35733 and relevant test report.


REFERENCE DOCUMENTS

Dwg. no. Title
SHST-34566 FH70-1 Launching Appliance for free fall life boat
SHST-35733 Modification documents for FH70-1

TESTS CARRIED OUT

Tests have been carried out on 08/Nov./2019 filed with SHST-35848.




ATTACHMENT TO
CERTIFICATE No. MED032825WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****