Product specification:
Fomtec® Enviro 3x3 Ultra is a novel multi-purpose alcohol resistant firefighting foam concentrate totally free from fluorinated surfactants and polymers (PFAS). The Fomtec® Enviro 3x3 Ultra is effective against hydrocarbon fires and also very effective against polar solvents.
Technical Characteristics
FOAM CONCENTRATE Fomtec Enviro 3x3 Ultra |
| Mixing Ratio | 3 | % |
| Specific Gravity at 20ºC | 1,035 ± 0,01 | g/ml |
| Viscosity at 20ºC | Pseudoplastic* |
| PH at 20ºC | 6,5-8,5 | - |
| Freezing point | -12 | °C |
| Recommended storage temperature | -11 - 55 | °C |
| Suspended sediment (v/v) | Less than 0,1 | % |
| Surface tension | ≤ 28,0 | mN/m |
* The detailed data on TDS Fomtec Enviro 3x3
Field of Application
This approval does not address the foam generating equipment, only the foam concentrate.
Fomtec® Enviro 3x3 Ultra is intended for use on class B hydrocarbon fuels as well as polar solvents like isopropyl alcohol, methanol, ethanol, acetone etc.
Fomtec® Enviro 3x3 Ultra can be used as low and medium expansion foam. Especially suited for use in mobile firefighting by use of aspirating foam discharge devices such as foam branch-pipes and monitors, where application rates and technique can be adjusted to the specifics of each incident. Or in systems designed for use with the product based on recommended minimum applications rates, application duration and discharge devices.
Fomtec® Enviro 3x3 Ultra is also effective against class A fires such as wood, paper, textiles etc. at 0,3% to 1% proportioning.
Technical Documentation
Technical Specification –TDS Fomtec Enviro 3x3 Ultra filed by RINA with n° PLFP/2755.
Risk Assessment Fomtec Enviro 3x3 Ultra filed by RINA with n° PLFP/2754.
EU Declaration of Conformity filed by RINA with n° PLFP/2752.
ATTACHMENT TO
CERTIFICATE No. MED176523XP
Page 2 of 3
Tests Carried Out
According to IMO MSC.1/Circ.1312 & MSC.1/Circ.1312/Corr.1- "Revised guidelines for the performance and testing criteria, and surveys of foam concentrates for fixed fire-extinguishing systems", Test report filed by RINA
with n° PLFP/2753.
Note
The foam concentrate should be delivered with a declaration (i.e., Batch Certificate) of the main characteristics (sedimentation, pH value, expansion ratio, drainage time and volumetric mass). The declaration will be the basis for the annual condition test.
The storage container should be compatible with the foam concentrate throughout the service life of the foam.