MED259825CS!002ENGB- -  -  N- LIMBO DOOR -N- S- S- -26/05/2025- Marine Equipment- - SN- S- - N-  - 781,145B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED259825CS/002- N-May 25, 2030781145
 
Form
  Marine Equipment(TO)
MED259825CS/002
Certification N. MED259825CS/002 - (ENG)
Certificate date 26/05/2025
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
LIMBO DOOR
Applicant OLCESE RICCI SRL
Place of requester VIA CAORSI 49  %  16030 SORI (GE)  % ITALY
Tel. N.,Fax, Email 0185700425, e.ricci@olcesericci.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Request 12/05/2025
Expire date 25/05/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED259825CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type LIMBO DOOR
Applicant OLCESE RICCI SRL
VIA CAORSI 49,16030 SORI (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Issued in Genoa on
This Certificate is valid until
May 26, 2025
May 25, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED259825CS/002
Page 1 of 3

Product description

Single leaf hinged door whose maximum clear opening size is 840 mm wide and 1840 mm high. Door leaf, having dimensions of 886 mm in width, 1886 mm in height and thickness of 83 mm, is composed, moving from the exposed side, of a steel sheet, 2 mm thick, a layer of material named PROMAGUARD ALU having thickness of 10 mm and density of 240 kg/m3, a layer of mineral wool type PAROC Marine Fire Slab 150 having thickness of 25 mm and density of 150 kg/m3, a layer of mineral wool type PAROC Marine Fire Slab 150 having thickness of 40 mm and density of 150 kg/m3 and a steel plate having thickness of 3 mm. The leaf may be fitted with a rectangular window having clear light of 300x400 (WxH) mm; the glass compound, type PYROBEL 25 EI 60 (manufacturer AGC) and having total thickness of 26.6 mm, is composed of five panes and, in between, four layers of thermo-expanding gel. The window frame is composed, on both sides, of a steel profile having thickness of 2 mm fixed to the leaf by means of M5 screws. Between glass and frame Superwool X607 gaskets, having dimensions of 20x5 mm is fitted; the glass is sealed by means of silicone type PROMAT SYSTEMGLAS. Inside the leaf, two steel stiffeners having dimensions of 40x3 mm are welded, with pitch of 100 mm, to the steel plate having thickness of 3 mm. The door frame is composed of a L steel plate 8 mm thick with square angle fixed to the bulkhead by means of 40 M10x25 mm steel bolts. The door closure is made tight with a gasket fitted in the bended edge on the rabbet which is shielded with a thermo-expanding gasket type PROMASEAL LSK having dimensions of 40x2,5 mm fitted on the perimeter edge leaf. The door is equipped with a lever closing device that acts on 3 points fitted outside leaf and actuated by one handle.








 



ATTACHMENT TO
CERTIFICATE Nr. MED259825CS/002
Page 2 of 3


Field of application

Fire resistant A-60 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions tested relevant to the width and height of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf;
- maximum door size tested;
- door used with a fire tested frame design.

Reference documents

Olcese Ricci drawing No. 19463 "CLASS A60 GASTIGHT DOOR - LIMBO" dated 31 July 2019 approved on 11 October 2019 with endorsement No. LABS-1911.

Tests carried out

Test as per RINA Test Laboratory Report No. 2019CS013019 issued on 11 October 2019 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED259825CS/002
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****