MED435424CS!001ENGD- -  -  N- TAI PING TUFTED CUSTOM CARPETS (100% WOOL) -N- S- S- -07/01/2025- Marine Equipment- - SN- S- - N-  - 1,039,396B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED435424CS/001- N-Jan 6, 20301039396
 
Form
  Marine Equipment(TO)
MED317124WS/001
Certification N. MED435424CS/001 - (ENG)
Certificate date 07/01/2025
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Item Nº MED/3.18c

Model or Denomin.
Items
TAI PING TUFTED CUSTOM CARPETS (100% WOOL)
Applicant TAI PING CARPETS (Xiamen) Co. Ltd.
Place of requester No. 96, Haijing West 3rd Road, Haicang District, Xiamen (Fujian)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Request 24/05/2024
Expire date 06/01/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED435424CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.18c
Description Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type TAI PING TUFTED CUSTOM CARPETS (100% WOOL)
Applicant TAI PING CARPETS (Xiamen) Co. Ltd.
No. 96, Haijing West 3rd Road, Haicang District, Xiamen (Fujian),CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Issued in Genoa on
This Certificate is valid until
January 7, 2025
January 6, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED435424CS/001
Page 1 of 2

Product description


Carpet made of:
pile: 100% wool;
pile weight: 1890 g/m² - 4610 g/m²;
primary backing: Polyester / cotton (320 g/m²);
bonding material: Flame retardant SBR Latex (1150 g/m²);
secondary backing: Cotton (60 g/m²).

Mass per area (g/m2) 3470 - 6140
Thickness (mm) 7 - 22
Colour: black or lighter.
Field of application

As floor covering.

The product may be applied to any metallic support, any non-combustible support and any material having low flame spread characteristics.

Tests carried out

Tests as per BTTG Test Laboratory reports Nos. 26/03352C/07/24/24 dated 15 August 2024 and 26/03385B2/12/24 dated 12 December 2024 issued according to:
  • IMO 2010 FTP Code Part 5;
  • IMO 2010 FTP Code Part 2.




ATTACHMENT TO
CERTIFICATE No. MED435424CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****