MED415326WS!001ENGB- -  -  N- C&C LIGURE C 2,5,C&C JONIO C 4,3 -N- S- S- -15/06/2026- Marine Equipment- - SN- S- - N-  - 1,054,806B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED415326WS/001- N-May 16, 20281054806
 
Form
  Marine Equipment(TO)
MED415326WS/001
Certification N. MED415326WS/001 - (ENG)
Certificate date 15/06/2026
Type Mezzi di salvataggio
Product Lifebuoys NOT intended for combined use with item MED/1.10 - Lifebuoys intended for combined use with item MED/1.10
Item Nº MED/1.1

Model or Denomin.
Items
C&C LIGURE C 2,5,C&C JONIO C 4,3
Applicant CANEPA & CAMPI SRL
Place of requester VIA GRAMSCI 4-6  %  16010 Manesseno (GE)  % ITALY
Tel. N.,Fax, Email 0107261006, 0107170020, rcampi@canepaecampi.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1628/Rev.2.
Request 2026-05-14
Expire date 16/05/2028
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED415326WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.1
Description Lifebuoys NOT intended for combined use with item MED/1.10 - Lifebuoys intended for combined use with item MED/1.10
Type C&C LIGURE C 2,5 C&C JONIO C 4,3
Applicant CANEPA & CAMPI SRL
VIA GRAMSCI 4-6,16010 Manesseno (GE),ITALY
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1628/Rev.2.
Issued in SHANGHAI on
This Certificate is valid until
June 15, 2026
May 16, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Peng Fang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED415326WS/001
Page 1 of 3

Technical Data

Type
C&C LIGURE C 2,5
C&C JONIO C 4,3
Outer Diameter
715±15 mm
760±15 mm
Inner Diameter
445±15 mm
470±15 mm
Section
115±10 mm
115±10 mm
Minimum Weight
of the Lifebuoy
2.5 Kg
4.3 Kg

Materials:
- Shell: High Density Polyethylene (HDPE F600), manufactured by Ningbo Xinhua Yin International Trade Co., Ltd;
- Buoyancy Material: Hard Foam Polyether (YB-BC002XM) manufactured by Jiangyin Yobo Chemical Industry Co., Ltd, and PAPI (MILLIQNATE MR-20) manufactured by Bond Polyurethane (Ryan) Co., Ltd;
- Grabline: PE manufactured by Dongtai Donglin Plastic Factory;
- Retro-reflective Tape (YGM-1100-TA), manufactured by Zhejiang YGM Technology Co., Ltd.

Retro-Reflecting material fitted around the body at four evenly-spaced points.


Technical Documentation

The design assessment is based on International Life-Saving Appliances (LSA) Code, IMO Res. MSC.48(66) as amended by IMO Res. MSC.207(81) and IMO Res. MSC.218(82).
- Technical Drawing of Lifebuoy (C&C LIGURE C 2,5 & C&C JONIO C 4,3), approved by RINA with No.: SHFP-9082;
- Bill of Materials, filed by RINA with No.: SHFP-37598;
- Marking, filed by RINA with No.: SHFP-37595;
- Table of Main Performance Parameters of Lifebuoy approved by RINA with No.: SHFP-9086.

Tests Carried Out

Lifebuoys Evaluation and Test Report issued by Wuhan Testing Center of Marine Life-Saving Appliances, according to IMO Res.MSC.81(70) as amended by MSC.200(80), MSC.226(82) and IMO Res. MSC.218(82) as below:
- Evaluation And Test Report (C&C LIGURE C 2,5) (Ref No.:2015210) filed by RINA with No.: SHFP-9083;
- Evaluation And Test Report (C&C JONIO C 4,3) (Ref No.:2015211) filed by RINA with No.: SHFP-9084;
- Drop Test (Supplement Test) filed by RINA with No.: SHFP-9127;
- Test for Operation with a light and smoke signal (Supplement Test) issued by Wuhan Testing Center of Marine Life-Saving Appliances, according to IMO Res.MSC.81(70) as amended by MSC.226(82) and filed by RINA with No.: SHFP-9196;
- Factory Inspection Report, filed by RINA with No. SHFP-37891.

ATTACHMENT TO
CERTIFICATE No. MED415326WS/001
Page 2 of 3

Continued:

Field of Application

Maximum installation height: 80 meters.

Lifebuoy Type C&C LIGURE C 2,5 is not intended to operate the quick-release arrangement for the self-activated smoke signal and self-igniting light.

Lifebuoy Type C&C JONIO C 4,3 is intended to operate the quick-release arrangement for the self-activated smoke signal and self-igniting light, attached to the lifebuoy body.


Remarks

The product is to be marked with name of manufacturer, type designation, date of manufacture, expiry and operational restrictions and approval information including approval information.

The product should be provided with brief instructions or diagrams clearly illustrating the use, also the manual operation, printed on the casing.

Production and installation testing shall be carried out according to IMO Res. MSC.81(70) part 2.

Retro-reflective material used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. If the lifebuoys are fitted with position-indicating lights or lifebuoys self-activating smoke signals, these shall also be approved according to the Marine Equipment Directive and bear the Mark of Conformity.


Notes

Renewal of Previous EC Type Examination (Module B) Certificate No.: MED116823WS/002. As declared, the initial certificate is renewed with the following modifications and reissued accordingly:
- Retro-reflective Materials are fitted in accordance with IMO Res. MSC.481(102).




ATTACHMENT TO
CERTIFICATE No. MED415326WS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Peng Fang
**** NOTICE: This is NOT an official certificate ****