MED225624WSENGD- -  -  N- PN35DRM -N- S- S- -26/11/2024- Marine Equipment- - SN- S- - N-  - 1,057,144B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED225624WS- N-Nov 25, 20291057144
 
Form
  Marine Equipment(TO)
MED634024WS/002
Certification N. MED225624WS - (ENG)
Certificate date 26/11/2024
Type Mezzi di salvataggio
Product Liferaft launching appliances (davits)
Item Nº MED/1.24

Model or Denomin.
Items
PN35DRM
Applicant Palfinger Neptune Marine Equipment Technology (Shanghai) Co., Ltd
Place of requester (Jiangyin office) 7th Floor, No.25 Beihuan Road, Yuecheng Town, Jiangyin City, Jiangsu Province, CHINA
Tel. N.,Fax, Email 0510-68157723, ---, a.zhao@palfingerneptune.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS '74 Convention, as amended - Reg.III/4, III/12, III/16, III/34(as applicable),IMO Resolution MSC.48(66) - LSA Code, as amended. IMO MSC.1/Circ.1632.
Expire date 25/11/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED225624WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.24
Description Liferaft launching appliances (davits)
Type PN35DRM
Applicant Palfinger Neptune Marine Equipment Technology (Shanghai) Co., Ltd
(Jiangyin office) 7th Floor, No.25 Beihuan Road, Yuecheng Town, Jiangyin City, Jiangsu Province, CHINA
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS '74 Convention, as amended - Reg.III/4, III/12, III/16, III/34(as applicable); IMO Resolution MSC.48(66) - LSA Code, as amended. IMO MSC.1/Circ.1632.
Issued in SHANGHAI on
This Certificate is valid until
November 26, 2024
November 25, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED225624WS
Page 1 of 2
TECHNICAL DATA

Product Description:
- Maximum Working Load, MWL = 35 kN
- Maximum Hoisting Load = 3.5 kN
- Arrangement/positioning of launching appliance on board of the ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).

REFERENCE DOCUMENTS

Technical Documents and Report approved and filed by RINA listed on Approval drawings and letter No.: SHST-51089 PN35DRM Manual Slewing Liferaft Davit (SHST/2024/1031/LEIGU); SHST-51088 MED B application form for PN35DRM Manual Liferaft Davit / SHST-51087 Analysis and assessment of the risk for PN35DRM Manual Liferaft Davit (SHST/2024/1030/LEIGU); SHST-54396 Test Report For PN35DRM Liferaft Davit and PN35NWM Winch (SHST/2024/1749/LEIGU).
TESTS CARRIED OUT
In accordance with IMO Resolution MSC.81(70) as amended, as per test report filed with SHST-54396.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.

Installation, on board testing shall be accepted by attending surveyor.





ATTACHMENT TO
CERTIFICATE No. MED225624WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****