MED250124WSENGF- -  -  N- HK105 -N- S- S- -19/06/2024- Marine Equipment- - SN- S- - N-  - 120,455B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED250124WS- N-Jun 18, 2029120455
 
Form
  Marine Equipment(TO)
MED224426WS
Certification N. MED250124WS - (ENG)
Certificate date 19/06/2024
Type Mezzi di salvataggio
Product Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Item Nº MED/1.26a

Model or Denomin.
Items
HK105
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Place of requester NO.33, BINHAI THE 1ST ROAD, TOUMEN PORT NEW INDUSTRIAL ZONE Linhai  % CHINA
Tel. N.,Fax, Email +86 576 85071900, +86 576 85073158, hx888@zjhxcb.com
Directive (EU) 2023/1667
Standards IMO Res. MSC 81(70) as amended,SOLAS 74/96 - Reg.III/4  LSA Code IMO MSC 48(66)
Reference Documents Reg. III/4, III/16, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, IV - IMO Res. MSC.97(73) (2000 HSC Code) 8 - IMO MSC.1/Circ.1419 - RINA Rules for the certification of Marine Equipment
Expire date 18/06/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED250124WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.26a
Description Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Type HK105
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
NO.33, BINHAI THE 1ST ROAD, TOUMEN PORT NEW INDUSTRIAL ZONE Linhai,CHINA
Testing standards IMO Res. MSC 81(70) as amended,SOLAS 74/96 - Reg.III/4  LSA Code IMO MSC 48(66)
Reference standards Reg. III/4, III/16, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, IV - IMO Res. MSC.97(73) (2000 HSC Code) 8 - IMO MSC.1/Circ.1419 - RINA Rules for the certification of Marine Equipment
Issued in SHANGHAI on
This Certificate is valid until
June 19, 2024
June 18, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED250124WS
Page 1 of 2
TECHNICAL DATA
- Hook release mechanism with SWL of 105 kN.
- Hanging-off load of 7957 kg.
- The mechanism with two release capabilities: normal (off-load) release capability and on-load release capability.
- A hydrostatic interlock is provided which may automatically reset upon lifting the boat from the water.
- Movable hook component with thickness of 60 mm.
- Hook with inner circle radius of 36.5 mm.
- Each hook assembly connected with lifeboat by 6 bolts.
- Hook release mechanism shall be used for Totally Enclosed Lifeboat only.
- Hook release mechanism is in compliance with IMO Res. MSC.48(66), as amended by Resolution MSC.320(89).

REFERENCE DOCUMENTS
Appr. Dwg. Title
SHST-51215 105kN RELEASE MECHANISM

TESTS CARRIED OUT

Release mechanism has been tested on 16/June/2024 in compliance with IMO Res. MSC.48(66), as amended and

IMO Res. MSC.81(70), as amended.





ATTACHMENT TO
CERTIFICATE No. MED250124WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****