MED204424WSENGD- -  -  N- C&C FIRE HOSE -N- S- S- -19/06/2024- Marine Equipment- - SN- S- - N-  - 3,990B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED204424WS- N-Jun 18, 20293990
 
Form
  Marine Equipment(TO)
MED319824WS
Certification N. MED204424WS - (ENG)
Certificate date 19/06/2024
Type Protezione antincendio
Product Fire-fighting hoses - non-percolating lay flat firefighting hoses (range of the inside diameter from 25 mm to 52 mm)
Item Nº MED/3.29

Model or Denomin.
Items
C&C FIRE HOSE
45-EPDM, 52-EPDM, 40-PVC, 45-PVC, 52-PVC
Applicant CANEPA & CAMPI SRL
Place of requester VIA GRAMSCI 4-6  %  16010 Manesseno (GE)  % ITALY
Tel. N.,Fax, Email ---, 00390107261006, quality@canepaecampi.com
Directive (EU) 2023/1667
Standards EN 14540:2014
Reference Documents SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Request 2024/02/21
Expire date 18/06/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED204424WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.29
Description Fire-fighting hoses - non-percolating lay flat firefighting hoses (range of the inside diameter from 25 mm to 52 mm)
Type C&C FIRE HOSE
45-EPDM, 52-EPDM, 40-PVC, 45-PVC, 52-PVC
Applicant CANEPA & CAMPI SRL
VIA GRAMSCI 4-6,16010 Manesseno (GE),ITALY
Testing standards EN 14540:2014
Reference standards SOLAS 74 Reg.II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in SHANGHAI on
This Certificate is valid until
June 19, 2024
June 18, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED204424WS
Page 1 of 3

Product Description


The lay-flat fire hose with inside diameter d = 40 mm, 45 mm and 52 mm consists of a PVC inner lining and a polyester filament yarn outside white layer.

The lay-flat hose with inside diameter d = 45 mm and 52 mm consists of an EPDM inner lining and a polyester filament yarn outside white layer. The hoses are intended for the fixed fire-fighting hose system.

Hose Type
Average Inside Diameter [mm]
Average Outside Diameter [mm]
Length [m]
Mass [Kg]
PVC 40
39,7
45,3
20
2,56
PVC 45
44,7
50,7
20
2,94
PVC 52
51,8
57,3
20
3,72
EPDM 45
44,6
50,7
20
3,70
EPDM 52
51,7
57,3
20
4,28

Material:
- Inner Lining: PVC or EPDM
PVC, Type: SG3/SG5, Manufacturer: Tangshan Sanyou Alkali Chbride CO., Ltd
EPDM, Type: 3062EM/1066C, Manufacturer: Wuxi Zhongcheng Chemical Co., Ltd or, Shanghai Sinopec Mitsui Elastomers Co., Ltd
- External Fabric: a polyester filament yarn
Type: 1000D/1500D/2000D, Manufacturer: Jiangsu Hengli Chemical Fiber Co., Ltd or, Zhejiang Guxiandao Polyester Dope Yarn Co.,Ltd

Field of Application/Limitation

Approved for use throughout the fire line except for hose reels.

The fire-fighting hose is intended for use at ambient temperature range -20°C up to +60°C.

Pressure Conditions:

Normal Working Pressure
1,0 MPa
Minimum Burst Pressure
4,5 MPa
Maximum Working Pressure
1,5 MPa
Proof Pressure
2,25 MPa

Each product is to be supplied with its manual for installation and use.






ATTACHMENT TO
CERTIFICATE No. MED204424WS
Page 2 of 3

Continued:

Reference Documents

Technical Documents prepared by JiangSu Sooloong Hose MFG CO., Ltd as below:

- Marking filed by RINA with No.: SHFP-26738


- Layer Arrangement (Typical) filed by RINA with No.: SHFP-26916
- Technical Drawings, approved by RINA with No.: SHFP-26916, SHFP-26917, SHFP-26918, SHFP-26919, SHFP-26920;
- Product Specifications, filed by RINA with No.: SHFP-26743 & 26747;
- Operation and Maintenance Instructions, filed by RINA with No.: SHFP-26745.

Test Carried Out

Tests Carried Out in accordance with EN 14540: 2014 as following:

- Test Report (Ref No. 230500080) Dated 2023-06-30 issued by Technicky Skusobny Ustav Piestany s.p., Piestany, Slovak Republic and filed by RINA with No.: SHFP-26751;


- Finished Product Inspection Report (Ref No.: SL/JL-ZJ-A06) witnessed by RINA Surveyor and filed with No.: SHFP-27366.

Marking of Product

The products are to be marked according to EN 14540:2014, Section 8 and with the MED Mark of Conformity (wheel mark). Furthermore, the obligations of manufacturers as defined in Article 12 of Directive 2014/90/EU shall be observed.




ATTACHMENT TO
CERTIFICATE No. MED204424WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****